[ts-7000] reboot doesn't work on TS-7250

To:
Subject:	[ts-7000] reboot doesn't work on TS-7250
From:	"Gary Wicker" <>
Date:	Mon, 11 Jun 2007 21:06:58 -0700

Hello all,

Using busybox on a ts-7250, the "reboot" command doesn't do anything. Also, "shutdown -r now" just hangs up after "INIT: no more processes left in this runlevel". I made a test kernel module that hits the TS7XXX_WATCHDOG registers, and it reboots the unit successfully but I don't want to re-do something that is already working. Is anyone else out there doing a software-controlled reboot with the TS-7250 and busybox? Thanks in advance for any help or advice.

Gary Wicker

__._,_.___

SPONSORED LINKS

`Single board computer`	`Hardware`	`Computer running slow`
`Linux os`

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] reboot doesn't work on TS-7250, Gary Wicker <= [ts-7000] Re: reboot doesn't work on TS-7250, naturalwatt Re: [ts-7000] Re: reboot doesn't work on TS-7250, Gary Wicker Re: [ts-7000] Re: reboot doesn't work on TS-7250, Gary Wicker

Previous by Date:	Re: [ts-7000] Redboot, 'fis delete' won't let me delete vmlinux ??, Christopher Friedt
Next by Date:	[ts-7000] Re: Redboot, 'fis delete' won't let me delete vmlinux ??, Kym Newbery
Previous by Thread:	[ts-7000] Re: To Eddie regarding new TS-7300's, dawydiuk
Next by Thread:	[ts-7000] Re: reboot doesn't work on TS-7250, naturalwatt
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU