[ts-7000] OP-2TTLCOM COM3

To:
Subject:	[ts-7000] OP-2TTLCOM COM3
From:	"ndivner" <>
Date:	Thu, 07 Jun 2007 22:19:14 -0000

Hi,

I have a TX7260 with the OP-2TTLCOM option.

Contrary to the 7260 Manual (see bottom of Page 30) I find that COM3 
is still using the COM3 HEADER RS232 levels and there is no activity 
at all on DIO2 Header Pins 1 and 3.

I need to use COM3 as a TTL port so I need to know how it is possible 
to achieve this.

Thanks in advance,

Noel Diviney.



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] OP-2TTLCOM COM3, ndivner <=

Previous by Date:	[ts-7000] rebuilding the SD image, walter woodrow
Next by Date:	[ts-7000] Does someone knows if the TS-9700 is usefull for the TS-7300?, kvnherrera
Previous by Thread:	[ts-7000] rebuilding the SD image, walter woodrow
Next by Thread:	[ts-7000] Does someone knows if the TS-9700 is usefull for the TS-7300?, kvnherrera
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU