Re: [ts-7000] [TS7250] Building and loading vmlinux

[Eddie Dawydiuk <>]

Hello,

> Below is what is happening from redboot when i load and run a fresh 
> compiled vmlinux from the source.
> 
> RedBoot> load -v -r -b 0x00218000 -m http -h 192.168.0.4 /vmlinux
> \

I believe vmlinux is not a raw binary, but rather an ELF executable. As 
a result you don't want to specify the -r option when loading vmlinux.

-- 
Best Regards,
________________________________________________________________
  Eddie Dawydiuk, Technologic Systems | voice:  (480) 837-5200
  16610 East Laser Drive Suite 10     | fax:    (480) 837-5300
  Fountain Hills, AZ 85268            | web: www.embeddedARM.com


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/