Re: [ts-7000] Specific question on creating a new filesystem, kernel on a CF card ...

[Jason Stahls <>]

You need to load a kernel into the address @ 0x0021800 first, do this 
with the load command just like you do to load a kernel from tftp/http

Jason

djtopper wrote:
> I guess my biggest concern is the following.  The
> linuxarm-guide-rev2.2 states that in order to load a new kernel into
> JFFS/YAFFS, I must first delete the old one.  So:
>
>   fis delete <kernel name>
>
> will delete the old kernel associated with that tag.
>
>   fis create -b 0x0021800 -l 0x1600 <new kernel name>
>
> will load vmlinux from my CF flash into JFFS?  It will then have a new
> tag with the same name?
>
> Something there seems fishy to me.  How will RedBoot even know where
> to look for my new kernel image?
>
> Thanks,
>
> Dave Topper
>   


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/