| To: | ts-7000 <> |
|---|---|
| Subject: | [ts-7000] TS-7300 |
| From: | "Loren M. Lang" <> |
| Date: | Mon, 21 May 2007 11:25:00 -0700 |
There appears to be very little documentation about using the optional CAN bus interface provided with the TS-7300. I am wondering if I need to change any cables to get it to work as shipped. Has anyone successfully made the TS-7300 with the ts-732 CAN bus interface communicate and what steps were neccessary? -- Loren M. Lang http://www.north-winds.org/ Public Key: ftp://ftp.north-winds.org/pub/lorenl_pubkey.asc Fingerprint: CEE1 AAE2 F66C 59B5 34CA C415 6D35 E847 0118 A3D2
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [ts-7000] problems bypassing fastboot, Loren M. Lang |
|---|---|
| Next by Date: | [ts-7000] SD Card Wear Leveling, Loren M. Lang |
| Previous by Thread: | [ts-7000] >> rerunning burn-in (already tested OK before)..., Gary Wicker |
| Next by Thread: | [ts-7000] SD Card Wear Leveling, Loren M. Lang |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU
