To: | |
---|---|
Subject: | Re: [ts-7000] ep9301 RTAI error |
From: | |
Date: | Mon, 7 May 2007 17:17:21 -0500 |
Did you mention somewhere you were using a 7250? In addition to the rtai patch you will need to patch the kernel for the yaffs2 memory... I seem to recall this patch file is supplied with the kernel code... ts7250_2k... look in 'arch/arm/def-configs' or something like that (it is this memory patch that doesn't allow the pre-built kernels to run on 7250 board). wrote on 05/07/2007 11:36:31 AM: > Hi, > > i'm Roberto Bielli and i have a problem with patch > ep9301_hal17_2.4.21-rmk1-crus1.4.2.patch and kernel 2.4.21 cirrus. > > you made this patch for RTAI and i want to know, if it is possible, > why when i compiled the kernel 2.4.21 with your adeos patch the kernel > says: > > ... RAMDISK: Compressed image found at block 0 Freeing initrd memory: > 4096K > Mounted root (ext2 filesystem). Freeing init memory: 40K > Unable to handle kernel paging request at virtual address 2000001c > pgd = c0008000 [2000001c] *pgd=00000000, *pmd = 00000000 Internal > error: Oops: 5 CPU: 0 pc : [<c0014280>] lr : [<c0014274>] Not tainted > sp : c0185fac ip : 00000000 fp : 00000000 r10: 4001bd44 r9 : 00000000 > r8 : 00000000 r7 : 20000010 r6 : 40002214 r5 : 400021d8 r4 : ffffffff > r3 : 20000010 r2 : 40002214 r1 : 400021d8 r0 : c0185fac Flags: nZCv > IRQs on FIQs on Mode SVC_32 Segment user Control: C000717F Table: > 00008000 DAC: 00000015 Process init (pid: 1, stack limit = 0xc0184378) > Stack: (0xc0185fac to 0xc0186000) 5fa0: bfffff40 400021d8 00000035 > 000000b8 00000000 5fc0: 00000000 00000000 bfffff40 00000000 00000000 > 4001bd44 00000000 00000000 5fe0: bffffd64 40001b88 40002214 20000010 > ffffffff c0015d70 00000000 00000000 Backtrace: not available Code: > eb00156a e1a03007 e1a02006 e1a01005 (e597700c) Kernel panic: Attempted > to kill init! Adeos: Current domain=Linux on CPU #0 > [stackbase=c0184000] Linux[cpuid=0]: priority=100, status=0x0, > pending_hi=0x0 > --------------------------------------------------------------------- > > > Is it a problem just found ?? Have you any idea ? > > Thanks for all your help. > > +-------------------------------------------------------+ > > Roberto Bielli > Axel S.r.l. > > Via Del Cannino, 3 > 21020 Crosio Della Valle > Varese - Italy > > Telefono: +39 0332 949600 > Fax: +39 0332 949600 > > E-mail: > Web Site: www.axelsw.it > > +-------------------------------------------------------+ > > > > > Yahoo! Groups Links > > <*> To visit your group on the web, go to: > http://groups.yahoo.com/group/ts-7000/ > > <*> Your email settings: > Individual Email | Traditional > > <*> To change settings online go to: > http://groups.yahoo.com/group/ts-7000/join > (Yahoo! ID required) > > <*> To change settings via email: > > > > <*> To unsubscribe from this group, send an email to: > > > <*> Your use of Yahoo! Groups is subject to: > http://docs.yahoo.com/info/terms/ > __._,_.___
SPONSORED LINKS
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe __,_._,___ |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [ts-7000] Using crosstools-0.48 to build gcc-3.3.4 glibc-2.3.2?, David Hawkins |
---|---|
Next by Date: | Re: [ts-7000] ep9301 RTAI error, Eddie Dawydiuk |
Previous by Thread: | [ts-7000] ep9301 RTAI error, roberto.bielli |
Next by Thread: | Re: [ts-7000] ep9301 RTAI error, Eddie Dawydiuk |
Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU