Re: [ts-7000] Mount NFS Failure from TS-7250

[Craig and Janet Gates <>]

The mount command is:

mount -t nfs 10.10.1.115:/home/zephyr/rootfs /mnt/nfs

xie_jian_hua wrote:

I tried to mount an NFS directory exported by my local Linux desktop,
but got the following error message:

$ mount 10.10.1.115:/home/zephyr/rootfs /mnt/nfs
mount: RPC: Unable to receive; errno = No route to host
mount: nfsmount failed: Bad file descriptor
mount: Mounting 10.10.1.115:/home/zephyr/rootfs on /mnt/nfs failed:
Invalid argument
$

I believe my ip config on the TS-7250 is fine, since I can telnet to
10.10.1.115 without any problem.

$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:D0:69:40:3D:D6
inet addr:10.10.1.68 Bcast:10.10.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2408 errors:0 dropped:0 overruns:0 frame:0
TX packets:361 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:39

My /etc/exports file on the host machine is:
dev]# cat /etc/exports
/home/zephyr/rootfs 10.10.1.27(rw,no_root_squash)
/home/zephyr/rootfs 10.10.1.68(rw)
/home/zephyr/rootfs 10.10.1.115(rw)
/home/zephyr/rootfs 127.0.0.1(rw)

I can run the following command on the host machine and it succeeds:
~]# mount 10.10.1.115:/home/zephyr/rootfs /mnt/nfs

Thank you.

__._,_.___

SPONSORED LINKS

Single board computer	Hardware	Computer running slow
Linux os	Single board

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___