[ts-7000] BAT3 troubles....

["PeterElliot" <>]

Hi All,

Does anyone have any experience with the BAT3 board in a TS-7300.

I'm trying to gat the BAT3 deamon to run from both the fast boot and 
normal boot with the following options 'bat3 --shutdown 60 --charge 
100 &' but the LED on the board does not start flashing to signify 
charging is taking place after I performa a fastboot. (I placed the 
command at the end of the startfga script in the fastboot partition - 
all the modules are loaded OK).

If I perform the command from the prompt the LED flashes, but as soon 
as I try to talk to it from my userland program via UDP messages the 
flashing stops and I don't get any of the 1Hz data packets.

Any suggestons would be greatly appreciated - as would a binary of 
the bat3save/dump program to check my hardware.

PJE




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/