[ts-7000] SD card on TS-7440

["Stephen Queen" <>]

Using a linux laptop running Debian, I partitioned a 1 GB sdcard, then
created the ext2 file system, and untarred the tsarm debian
distribution onto it. I then installed it into a TS-7400 and it worked
fine. Following the same procedure, I did the same thing  with a 4 GB
sdcard, and when it was installed in the TS-7400, it would not mount.
I got the following error:
$ mount /dev/sdcard0/disc0/part1 /mnt
mount: Mounting /dev/sdcard0/disc0/part1 on /mnt failed: Invalid argument

I look at dmesg and see:
sdcard0: Technologic Systems SD card controller, address 0x13000000
sdcard0: card size 7843840 sectors
Partition check:
 sdcard0a: p1
VFS: Can't find ext2 filesystem on dev sdcard0(254,1).
yaffs: dev is 65025 name is "fe:01"
yaffs: Attempting MTD mount on 254.1, "fe:01"
yaffs: dev is 65025 name is "fe:01"
yaffs: Attempting MTD mount on 254.1, "fe:01"
VFS: Can't find ext2 filesystem on dev sdcard0(254,1).
yaffs: dev is 65025 name is "fe:01"
yaffs: Attempting MTD mount on 254.1, "fe:01"
yaffs: dev is 65025 name is "fe:01"
yaffs: Attempting MTD mount on 254.1, "fe:01"

>From digging around the group I found a post that claimed that a
TS-7400 could use a 4GB sdcard.
Re: [ts-7000] TS-7300 SDCARD1 Formatting...
Dated Wed Dec 27, 2006 5:06 pm

What am I missing?

Thanks,
Stephen Queen


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/