--- In "mrsoto" <> wrote:
>
> Hello,
> I've to support jpeg images on TS7300 but apparently my
> installation doesn't.
>
> My application and showimg example let me view png and xpm format
> but jped aren't supported. The precompiled
> qt-embedded-free-3.3.4-compiled-compact is installed.
>
> If I do compile a new QT limiting several options I get the error
> "Can't drive depth 16"
>
> Do some one here have some shareable experience on how to setup to
> view jpeg images in a TS7300?
>
If all you need to do is to view images, check out microwindows. I
hacked up some code a while back to convert an old laptop to a picture
frame, showing JPEGs. Lots smaller than Qt - about 300K - and faster
too. The source tree has some examples for doing that.
If you need all the fluff Qt gives you, you need to look at how to
build Qt - ISTR that by default there are some depths enabled but I
can't remember which ones.
--Yan
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|