Tuğrul GÜÇLÜ wrote:
> I'm trying to bootup TS7400 from SD card . When TS-9441 is connected to the
> board , there is no problem but when i remove and restart Debian doesn't
> show up. I can understand it by sending ping command to TS7400.
> I have to remove TS-9441 because I'm trying to make looppack connection and
> measure the voltages over some DIO's , but it covers all upper and lower
> header.
> Any ideas ?
Have you set the linuxrc soft-link to something reasonable? For
example (trying to remember the relevant docs here) if you boot from
the TS-9441 and issue commands
ln -sf linuxrc-mtdroot linuxrc
save
(please double-check these against the info in
http:///www.embeddedarm.com/Manuals/ts-7400-info) then you've set up
your next non-TS-9441 boot to go directly to the Linux system on
on-board flash. My apologies if you've already set this up -- it's
the first thing to check. Other linuxrc-* scripts are available to go
to Linux distributions on SD card, NFS server, etc.
Mel.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|