[ts-7000] Problem recognizing 1G usbflash on ts-7250

["bert_rubash" <>]

When I insert the stick I get the following:

hub.c: new USB device not_pci-3, assigned address 3
scsi1 : SCSI emulation for USB Mass Storage devices
  Vendor: CRUCIAL   Model: USB Flash Disk    Rev: 2.00
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi removable disk sdb at scsi1, channel 0, id 0, lun 0
sdb: Unit Not Ready, sense:
Current 00:00: sns = 70  6
ASC=28 ASCQ= 0
Raw sense data:0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00
0x00 0x28 0x00 0x00 0x00 0x00 0x00
sdb : READ CAPACITY failed.
sdb : status = 1, message = 00, host = 0, driver = 08
Current sd00:00: sns = 70  6
ASC=28 ASCQ= 0
Raw sense data:0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00
0x00 0x28 0x00 0x00 0x00 0x00 0x00
sdb : block size assumed to be 512 bytes, disk size 1GB.
 /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:10, sector 0
 I/O error: dev 08:10, sector 0
 unable to read partition table


I tried both a single partition and I split it into two partitions. I
tried partitioning and formatting both on the ts-7250 and my desktop
with Gentoo. My Gentoo has no trouble reading any of the versions.

-Bert Rubash



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/