--- In Eddie Dawydiuk <> wrote:
>
> Hello,
>
> > RedBoot> fis load vmlinux
> > RedBoot> exec -c "console=ttyAM1, 115200
> > nfsroot=10.1.136.251:/home/user/nfsr ip
> > [[[[[[STOPS HERE, with the cursor blinking]]]]]
> >
> > Is there anything that I've missed out?
>
> You are sending all of the kernel messages to COM2 at 115200, if you
> want to send them to COM1 you'll want ttyAM0. I see the manual has
> ttyAM1, I'll see if we can change this to ttyAM0 for consistency.
>
> //Eddie
>
Hi -
If it was booting correctly (but with mis-directed kernel messages),
would he not see a login prompt on ttyAM1 eventually?
Also, Dave, I see you have a typo in your exports file: inseure should
be insecure.
Regards, ........ Charlie
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|