> Actually I sent an email to as shown below but have
> not received a reply yet. Either they have not noticed it or maybe my
> aggressive spam filter chewed their reply. I present it here hoping that
> someone may answer it.
>
> I am planning to buy a an enclosure for a TS-7260 and a couple of
> PC/104 boards, TS-BAT3 and TS-9600. I see in a picture of the case
> you show in the web page that there are separators/connectors
> between the motherboard and the daughter boards and I do not find
> any mention of these components anywhere. Do these components come
> with the boards or the case?
>
The TS-ENC720 (http://www.embeddedarm.com/epc/tsenc720-spec-h.html) would be
the enclosure you would want for the TS-7260. All enclosures come with any
internal cables needed for that particular enclosure (e.g. to connect the
serial port on the main board to the chassis mounted connector board). Any
daughter boards you purchase will come with standoffs. Other then that each
board of course has a PC-104 connector and (for daughter cards) the mating
pins to connect to the board below it.
Regards,
Michael
------------------------ Yahoo! Groups Sponsor --------------------~-->
Yahoo! Groups gets a make over. See the new email design.
http://us.click.yahoo.com/hOt0.A/lOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|