[ts-7000] TS-7400: fdisk -l /dev/mtdblock/3

["phillipchungnz" <>]

Hi,

This morning I put the TS-9441 jumper board onto an TS-7400, turned on
the TS-7400, and entered the commands:

$ insmod ts7xxx_nand.o
Using ts7xxx_nand.o
$
$ fdisk -l /dev/mtdblock/3

Disk /dev/mtdblock/3: 29 MB, 29343744 bytes
255 heads, 63 sectors/track, 3 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/mtdblock/3 doesn't contain a valid partition table
$

Now when I do the same, I get:

$ insmod ts7xxx_nand.o
Using ts7xxx_nand.o
$
$ fdisk -l /dev/mtdblock/3
$

How do I restore /dev/mtdblock/3? Without it, the TS-7400 doesn't boot
up because it can mount a filesystem on to /dev/mtdblock/3.


I've tried entering:

$ save
Saving ramdisk to flash, please do not remove power until finished.
$ fdisk -l /dev/mtdblock/3
$

with the TS-9441 jumper board on.

Thanks for any assistance.

Phillip



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Something is new at Yahoo! Groups.  Check out the enhanced email design.
http://us.click.yahoo.com/kOt0.A/gOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/