Re: [ts-7000] Re: TS-7200 Encloser Power Connector

[Craig and Janet Gates <>]

This should help:

http://www.embeddedarm.com/downloads/Schem_Mech/TS-722_Schematic.pdf

the power connector is part #281-1763-ND

The mating connector from the power supply is 281-1063-ND

Both are available from http://www.digikey.com

Craig

lairlab wrote:

Anthony,

I think that part is from On-Shore-Technology.

Take a look at Digi-Key, or better yet get a catalog from OST to figure out what the part
number is.

--- In .com, "raptort3000" <raptor_t1000@...> wrote:
>
> I have the TS-7200 Metal Encloser with the power supply that comes
> with it. The power adaptor comes with a little connector that
> connects directly into the metal encloser to connect to the power
> supply. I was wondering if anyone knew of a website/part number/ or
> store that I can get the little power connecter from, so that I can
> hook my own wires into it and connect it to a battery??? I do not
> want to cut off the one from my power adaptor because I still like to
> plug it into the wall.
>
> -Anthony
>

__._,_.___

SPONSORED LINKS

Single board computer	Hardware	Computer running slow
Linux os	Single board

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___