Gary Wicker <> [2007-02-02 14:32:48]:
> Thanks Curtis, but I think I there is a deeper underlying problem in my
> case. There are actually three boot images involved, not two: preboot,
> bootrom, and redboot. The factory 2K EEPROM code loads an additional 16K
> image from flash, these images are located at:
>
> ftp.embeddedarm.com/images/tsbootrom
Right place. I've tried several of them before I've found one working
properly.
> I assume this is the image that then loads from the redboot partition in
> flash. Now I just need to figure out where to install that tsbootrom image
> in the flash and I should be able to restore one of these boards to factory
> condition using serial_blaster. When I was doing my flash experiments I
> must have wiped out this image.
I've flashed that tsbootrom back via RedBoot.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|