Re: [ts-7000] failing to bring up eth on sdcard boot for 7400

[Larry <>]

I've seen this before. Check that you have all the loadable modules
and libraries that ethernet needs.

cryptyy wrote:

I have found the reason why my sdcard boot seems to fail .. its not
failing at all but eth0 is not coming up for some reason .. attached
is the boot up for the sdcard ...

e2fsck 1.37 (21-Mar-2005)
/dev/sdcard0/disc0/part3: clean, 14753/60000 files, 232264/239104 blocks
Cleaning up ifupdown...done.
Loading modules: af_packet usb-ohci usb-ohci-ep93xx
Checking all file systems...
fsck 1.37 (21-Mar-2005)
... done.
Setting up networking...done.
Starting hotplug subsystem: usb isapnp ide scsi.
Setting up IP spoofing protection: rp_filter.
Enabling packet forwarding...done.
Configuring network interfaces...Operation failed.
---->>>>> Failed to bring up eth0.
done.
Starting portmap daemon: portmap.
Recovering nvi editor sessions... done.
INIT: Entering runlevel: 2
Starting internet superserver: inetd.
Starting OpenBSD Secure Shell server: sshd.
Starting NFS common utilities: statd.
Starting periodic command scheduler: cron.
Starting web server: apache-ssl.

Debian GNU/Linux 3.1 ts7000 ttyAM0

any one have an idea why that is happening?
I can bring it up manually with the serial port if i use the
exit command from the serial shell .