Hello,
>> We're trying to get the sdcard up and running but when we insert the
>> sdcard module we get:
>>
>> $ insmod ./sdcard.o
>> Using ./sdcard.o
>> Warning: loading sdcard will taint the kernel: non-GPL license -
>> Proprietary
>> See http://www.tux.org/lkml/#export-tainted for information about
>> tainted modules
>> insmod: init_module: sdcard: Device or resource busy
>>
>> Dmesg gives us:
>> sdcard0: Technologic Systems SD card controller, address 0x13000000
>> sdcard0: no card found
>>
>> There's a 1GB SDcard in the reader but we get no anwer...
>>
>> greetings,
>>
>> wimpunk.
>>
>
> It looks like I forgot to post a question. I suppose "sdcard0:
> Technologic Systems SD card controller, address 0x13000000" means the
> driver has found a cardreader.
sdcard0 is the default name of the device, and 0x13000000 is the default
location. If you're using a TS-7300 this address corresponds to the SD
card socket closest to the EP9302... What board are you using? What
driver are you using?
> Is this correct or didn't the driver
> found any cardreader and do I have to pass any option to the driver?
It depends upon what board you are using and what SD socket you are
using...
//Eddie
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|