Re: [ts-7000] specification of pc/104

To:
Subject:	Re: [ts-7000] specification of pc/104
From:	Lares Moreau <>
Date:	Mon, 29 Jan 2007 11:59:11 -0700

Check out the ts-7250 manual (not the datasheet) page 33.  It has all the specs.
Short version -- No DMA; loose IRQ3; the 8MSB of the 16bit bus are moved to the 
64pin connector in non-standard locations; the -5V, +-12V are maked 'reserved' 
and are left with No Connection on the board; and the access address is 
different from 'standard' ISA stuff.
That is all I can remeber of the top of my head. I may have missed something, 
so verify. :)

-Lares

> i want anybody to send me the specs of pc/104
> not from www.pc104.org that i heard this specs is different from the
> specs of ts-7250.
> thanks alot
>
>

pgpG51FQrsd1s.pgp
Description: PGP signature

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] specification of pc/104, HOSAM YOUSIF Re: [ts-7000] specification of pc/104, Lares Moreau <=

Previous by Date:	[ts-7000] net-snmp utilities for ts-7250, Andrew Neuschwander
Next by Date:	[ts-7000] Re: TS-7400 GPIO problem, jan_fristedt
Previous by Thread:	[ts-7000] specification of pc/104, HOSAM YOUSIF
Next by Thread:	[ts-7000] TS-7400 GPIO problem, jan_fristedt
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU