[ts-7000] lcd CSTN to VGA controller?

To:
Subject:	[ts-7000] lcd CSTN to VGA controller?
From:	"leungerald" <>
Date:	Mon, 29 Jan 2007 08:31:50 -0000

Hi,

I have a Sharp LM8V302 STN LCD

I was wondering if it is possible to convert it into a VGA port so
that I can connect it into a ts7300 which is the board  i'm planning
to purchase.

Sorry if this is a noOb question, but I've never dealt with LCD's
before :)





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] lcd CSTN to VGA controller?, leungerald <=

Previous by Date:	Re: [ts-7000] Need Help regarding PC/104.., Jim Jackson
Next by Date:	[ts-7000] Using USB WIFI with zd1211 chipset, leomecma
Previous by Thread:	[ts-7000] New SD card driver., Eddie Dawydiuk
Next by Thread:	[ts-7000] Using USB WIFI with zd1211 chipset, leomecma
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU