[ts-7000] ttyTS0 on TS-7400

To:
Subject:	[ts-7000] ttyTS0 on TS-7400
From:	"loupi7400" <>
Date:	Fri, 26 Jan 2007 18:33:11 -0000

Hello,

I have a TS-7400 and I would like to use it's UART #3.
In the documentation, it points out that UART #3 is on ttyTS0,
but i can't find that entry in /dev. I have both ttyAM0, ttyAM1 and 
tty AM2, but no ttyTS0.

Is there an easy way to add ttyTS0 to the /dev directory?

Best Regards

Louis-Pierre Beaumont





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] ttyTS0 on TS-7400, loupi7400 <= Re: [ts-7000] ttyTS0 on TS-7400, Michael Schmidt

Previous by Date:	[ts-7000] interrupt handling in User Space.., Manish Varma
Next by Date:	Re: [ts-7000] interrupt handling in User Space.., Jason Stahls
Previous by Thread:	[ts-7000] interrupt handling in User Space.., Manish Varma
Next by Thread:	Re: [ts-7000] ttyTS0 on TS-7400, Michael Schmidt
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU