Hello,
> Just out of curiousity, is there some outline of how the watchdog device
> functions? (api, or a list of *control register variables?). Also what
> are the largest/smallest values that can be put in the *feed location?
The TS7250/TS-7260 manual documents the WDT. You can arm the WDT for
250ms, 500ms, 1s, 2s, 4s, or 8s.
//Eddie
> Eddie Dawydiuk wrote:
>> Hello,
>>
>>>> Is the watchdog timer implemented w/ the 2.4-ts9 kernel?
>>
>> I'm not sure what your asking. The WDT is implemented in hardware/firmware.
>> The kernel doesn't feed the WDT....
>>
>>>> If so, does anyone have any example code on how to use it? Does it
>>>> follow any similar standards described in linux24/Documentation/watchdog ?
>>
>> There are two WDTs available. The EP9302 has a WDT, although an errata
>> was released regarding the WDT. As a result we implemented a WDT in the
>> CPLD. You can find example code for the WDT in the CPLD here
>> http://www.embeddedarm.com/downloads/samplecode/wdt2.c.
>>
>> //Eddie
>>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|