| To: | |
|---|---|
| Subject: | Re: [ts-7000] Setting USB Power |
| From: | |
| Date: | Sat, 20 Jan 2007 10:07:10 -0700 (MST) |
On Fri, 19 Jan 2007, tyerslockandblock wrote:
> However, when I plug in the disk drive to the USB port, the power
> supply on the board "panics", lights up the red and green LEDs close
I use a tiny 8GB USB microdrive, which works well. This lets me avoid the
bigger drives or the slow read/write cycles of the spare USB flash memory
I have. The only problem might be the standby current when batteries are
used. When I need even more speed, I use NFS.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] Python and TS-700, Juliano Pillati |
|---|---|
| Next by Date: | [ts-7000] Minicom problem??, Lares Moreau |
| Previous by Thread: | [ts-7000] Re: Setting USB Power - subsequent issue, tyerslockandblock |
| Next by Thread: | [ts-7000] General C problem, Jason Stahls |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU