--- In Eddie Dawydiuk <> wrote:
Thank you very much by a the aid. I work super good Thanks.
>
> Hello,
>
> > look, I have a PC TS-7260, previously I change the IP and MASK and
> > later I cannot be connected. tries to connect for COM 1 setting
> > JUMPERS, but dont work because one program in C are corrupted,
> > generating interruption in the communication, I cannot accede by
> > Ethernet nor by ports COM.
> >
> > I believe that the only form to fix the problem is re installing
> > everything,
> >
> > exists another form?
>
> Unless something has happened to the bootrom and bootloader you
should
> still be able to drop to a redboot prompt. You could then append
> init=/bin/sh to the exec line. This would allow you to modify the
init
> scripts to stop you C program and correct you networking scripts.
>
> //Eddie
>
> > --- In Eddie Dawydiuk <eddie@> wrote:
> >>
> >> Hello,
> >>
> >>> I need to install linux in a TS-7200, and not by where to begin.
> >>>
> >>> As they are the steps to install linux in ts-7200 from the
> > beginning?
> >>
> >> Linux is preinstalled.
> >>
> >> //Eddie
> >>
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|