It is now in the files area. Look for pl2303.zip.
Setserial does not work with USB based devices. Use stty instead to
set data rate and other parameters.
Good luck,
Amardeep
--- In "wifibot" <> wrote:
>
> hello,
>
> I did not find your file ? I am also interested in it.
>
> I have also another question :
> Does "setserial" work normally with this device.
>
> it says :
>
> $ setserial /dev/usb/tts/0
> Cannot get serial info: Invalid argument
>
> Thank you,
>
> Laurent
>
>
> --- In "asc135" <asc1000@> wrote:
> >
> > --- In "allan72xxx" <ts7xxx@> wrote:
> > >
> > > --- In "asc135" <asc1000@> wrote:
> > > >
> > > > > PL2303: support is broken in late 2.4 Linux kernels (it broke
> > > > > after 2.4.18) but good in 2.6.8 and later.
> > > > [...]
> > > > Good news: A solution has been found.
> > > > [...]
> > >
> > > I've got the same problem and had all but given up when I came
across
> > > your message. Any news on the testing?
> > >
> > > Regards,
> > >
> > > Allan Høiberg
> > >
> >
> > Hello Allan!
> >
> > The testing went very well. I have been running for weeks now with no
> > problems at all under both Debian and TS-Linux. Because there was
> > little interest expressed I wasn't in a big hurry to post it. But
> > since it can solve your problem, I'll roll it up and upload it later
> > this evening.
> >
> > All the best,
> > Amardeep
> >
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|