On Thu, Dec 21, 2006 at 10:32:20PM -0000, aqueisser wrote:
> I have a Linksys USB Wifi dongle (WUSB54G) that uses the 1211 driver
> but has a
> different vendor or device ID. I'd like to edit the ID table and make
> my unit work.
>
> What's the best way to recompile the driver for the TS7300? Is it best
> to use the cross-compile tools or can I build right on my board?
>
> Which set of source files do I use for the driver?
I have been successful cross compiling, and using the r83 version.
Go to http://zd1211.ath.cx/ and follow the directions. Some devices want 1211
and others want 1211b. Figure out which you need and edit the Makefile as
required.
Joe
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|