ts-7000
[Top] [All Lists]

Re: [ts-7000] camerserv

To:
Subject: Re: [ts-7000] camerserv
From: Jim Jackson <>
Date: Sun, 19 Nov 2006 21:46:12 +0000 (GMT)


On Sun, 19 Nov 2006, David Kadjo wrote:

....snip....
> Also, it is necessary to bring eth0 down for the
> wireless interface to work ?
>

In normal operation, both network interfaces, if used would be on
seperate networks.

If they are on the same network, e.g. you have the wireless interface
connected to a WAP connected to the same network that your eth0 is on then
you will need to only leave up whichever interface you wish to use.






 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU