Re: [ts-7000] set com2 to receive data from GPS board.

["Michael Schmidt" <>]

...

> int main(int argc, char*argv[])
> {
> int file_id;
> /* check the command */
> if(argc <2)
> {
> printf("serial_tester<device>\n");
> return 0;
> }
> /* Open the port */
> printf("Opening device %s\n", argv[1]);
> file_id = open_port(argv[1]);
> /* Get port configuration */
> port_configuration(file_id);
> /* Set the port to non blocking and read the port */
> read_port(file_id);
> close((file_id));
> return 0;
> }
> 
> 
> but the output i keep on getting is:
> serial_tester<device>
> 
> 
> what is wrong with this code?
> 

It wants an argument...

> thanks
> Sonia



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/