[ts-7000] How to run program from redboot before kernel start ??

To:
Subject:	[ts-7000] How to run program from redboot before kernel start ??
From:	"skalny7" <>
Date:	Thu, 09 Nov 2006 11:49:27 -0000

Hello,
Dose anybody have experience with compiling/loading/running programs
from redboot ?

We need to run simple program from redboot before linux kernel start.
We tried to compile/load/run simple program that turn on onboard leds,
but after command "go 0x....." there is no reaction...

Can anybody help with this ??





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] How to run program from redboot before kernel start ??, skalny7 <=

Previous by Date:	Re: [ts-7000] Re: java recommendations, Don W. Carr
Next by Date:	[ts-7000] Re: java recommendations, John Chung
Previous by Thread:	[ts-7000] Re: java recommendations, John Chung
Next by Thread:	[ts-7000] TS-7260 Bricked After Boot to SD Card Modification Atempted, Kevin R. Battersby
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU