(re-posting via the web form, direct mail to the list address didn't work?)
1. The "linuxarm-guide-rev2.0.pdf" states on page 28:
===========
The TS-Kernel supports USB WiFi 802.11g devices based on the zd1211 chipset. The
module binary is available at:
? ftp://oz.embeddedarm.com/wireless/zd1211/module/zd.o
In order to bring up a wireless network, one needs to load the required
modules, use
ifconfig to brings wlan0 up and then use iwconfig to associate the interface to
a WAP.
===========
Do the same directions apply for WLAN operation under Debian?
All I've done to my 7400 so far is change the /linuxrc symlink to point
to /linuxrc-
sdboot and rebooted under Debian, ethernet and serial are working great and now
I want
to bring up the WLAN.
2. is there any way to get WEP or WPA encryption using the WLAN support in
Debian ?
(Ideally WPA if for no other reason than I only have one base station in the
house and it's
in WPA mode)
3. The kit I got came with the SD card pre-installed in the 7400 with the
Debian
environment on it. If I mess that up in some way, what are the steps to
restore that flash
card to its factory state ? Or, what would be the best way to back it up?
thanks in advance for any help on these.
Rob
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|