Re: [ts-7000] Re: How can I compile and ultimately load a needed kernel module for my TS-7300?

["Michael Schmidt" <>]

On Monday, October 02, 2006 8:33 PM, Alvaro Aguirre wrote:

>But one of your questions has not been answered... once you have the kernel 
>binary, how you put it on the ts7300? (for thew people that
> doesn't know it the ts7300 doesn't boot with redboot so you don't have 
> access to the "fis load vmlinux")... Can be the kernel image put inside
> the sd card? if i want to boot a rootstrap outside the arm machine with 
> nfs and without redboot, can it be done?

The kernel goes in the first partition of the SD card... you will need to 
'dd' it there.  For example:
    dd if=vmlinux of=/dev/sda1
(Assuming your SD card is /dev/sda)

Regards,

Michael



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/