[ts-7000] Re: test TS7300 DIO1 Header

["suptouch" <>]

Dear eddy,

I've try to drive only the bit of my test i/o but no thing, it's why I
drive all the i/o... and I can seem some i/o work !

--- In  "Eddie Dawydiuk" <> wrote:
>
> Hello,
> 
> > I've made a small program to test the i/o of the DIO1 header on my
> > TS7300 on output mode. I generate a 0.5Hz signal on each port, and the
> > result is :
> 
> It looks like you are driving every bit in portb,e,c,& f high then low.
> You should only be modifying the bits that correspond to the GPIO pins.
> 
> //Eddie






 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/