| To: | |
|---|---|
| Subject: | [ts-7000] Re: RS485 command? |
| From: | "Yan Seiner" <> |
| Date: | Tue, 26 Sep 2006 14:16:16 -0000 |
--- In Neil Cherry <> wrote: > > Can anyone point me to the manual with the commands to change the > serial ports over to RS485 (half duplex). I remember seeing it but > not I can't find it. Which card? See http://www.seiner.com/ts7000 and look at the modbus code if you're using the TS-SER4. --Yan Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/ts-7000/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/ts-7000/join (Yahoo! ID required) <*> To change settings via email: <*> To unsubscribe from this group, send an email to: <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] RS485 command?, Neil Cherry |
|---|---|
| Next by Date: | Re: [ts-7000] flash memory size of new TS-7400 board, Don W. Carr |
| Previous by Thread: | [ts-7000] RS485 command?, Neil Cherry |
| Next by Thread: | Re: [ts-7000] Re: RS485 command?, Neil Cherry |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU