[ts-7000] Re: TS-7260 with OP-2TTLCOM problem - solved

["Guillermo Prandi" <>]

After much dwelling on this problem, we determined that it was not 
the board's fault. The other device was working with 8-O-1 instead of 
8-N-1, and therefore we were experimenting framing errors (hence the 
lost characters). It looks like characters with framing errors were 
silently discarded. This is the first time I see 8-O-1 in my life, so 
it caught me off guard. The OP-2TTLCOM option cannot handle parity 
when data is 8 bits, so we had to switch to COM2 and use a MAX3232 
for level conversion.

Guille

--- In  "Michael Schmidt" <> wrote:
>