Re: [ts-7000] crosstool buil for ts-7260

["Don W. Carr" <>]

I have used them with SUSE 9, Fedora 2 and 3, Ubuntu 5.10 and 6.06. I think the executables for the compiler will run on just about any distribution with any kernel since they only read and write files, and stdin and stdout. If anybody has had  any problem running them please chime in,  but  I had assumed they would run on just about anything. You should just have to copy the branch under /opt and set the path.

I used the following command to set the path:

PATH=/opt/crosstool/arm-linux/gcc-3.3.4-glibc-2.3.2/bin/:$PATH
export PATH

Then I add these to the top of my makefile:

CC=arm-linux-gcc -mcpu=arm9 -Wall

CPP=arm-linux-g++ -mcpu=arm9 -Wall


Let us know if you still can't make it work.


Don.

On 9/4/06, <m("chesbayva.com","linux");">> wrote:

Don,

I would have been happy to do that. I do not think the pre-compiled ones work on
my host machine, but I may try again.

Reading the TS documentation, I think it says the best idea is to take the
crosstool tarball, and build your own using the included script to do so, on the
desired host machine. That sounded prety easy to me, and would give me more
flexibility on where I do development.

Tom

Quoting "Don W. Carr" <doncarr%40gmail.com>:

> You should just download and install the one on the website. You need to
> match the kernel and library version. Just easier to use the one supplied by
> TS. Don.
>
> On 9/4/06, linux%40chesbayva.com < > wrote:
> >
> > I am trying to build a cross compiler to run on SUSE Linux for use with
> > the
> > ts-7260. can anyone recommend a good combination of versions (gcc, glibc,
> > and
> > binutils) for this processor/board? Picking the right combination seems to
> > be
> > the magic.
> >
> > Should I use a kernel version that matches the board (2.4.26, I think) or
> > my
> > host system (2.6.13)?
> >
> > Thanks
> >
> > Tom Z.
> >
> >
> >
>
>
>

> --
> Dr. Don W. Carr
> J. G. Montenegro 2258
> Guadalajara, Mexico
> +52-333-630-0704
> +52-333-836-4500 ext 2930
>

-- 
Dr. Don W. Carr
J. G. Montenegro 2258
Guadalajara, Mexico
+52-333-630-0704
+52-333-836-4500 ext 2930

__._,_.___

SPONSORED LINKS

Single board computer	Hardware	Computer running slow
Linux os	Single board

---

YAHOO! GROUPS LINKS

•  Visit your group "ts-7000" on the web.
   
•  To unsubscribe from this group, send an email to:
   =Unsubscribe
   
•  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

---

__,_._,___