[ts-7000] libresolv.so.2 revisted

To:
Subject:	[ts-7000] libresolv.so.2 revisted
From:	Neil Cherry <>
Date:	Sat, 02 Sep 2006 09:58:49 -0400

I just ran into the 'host unknown' problem where other have loaded
libresolv.so.2. I noticed that my board has libresolv-2.3.2.so. I
just linked libresolv.so.2 to libresolv-2.3.2.so and now the
name resolution is properly working. I did the following in /lib:

ln -sf libresolv-2.3.2.so libresolv.so.2

-- 
Linux Home Automation         Neil Cherry       
http://www.linuxha.com/                         Main site
http://linuxha.blogspot.com/                    My HA Blog
http://home.comcast.net/~ncherry/               Backup site





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] libresolv.so.2 revisted, Neil Cherry <= [ts-7000] Confused about 7250 A/D, naturalwatt

Previous by Date:	[ts-7000] tun/tap drivers, Dave Cramer
Next by Date:	[ts-7000] Recovery with SerialBlaster (was Re: NetBSD on a TS-7260), Tom Hansen
Previous by Thread:	[ts-7000] tun/tap drivers, Dave Cramer
Next by Thread:	[ts-7000] Confused about 7250 A/D, naturalwatt
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU