| To: | |
|---|---|
| Subject: | [ts-7000] Re: ts-7300 problems |
| From: | "Mihai" <> |
| Date: | Fri, 01 Sep 2006 05:29:11 -0000 |
i've solved my problems:
a) the board is labeled kind of funny. even there are 7 settings for
the jumper only numbers 1-6 are written on the pcb. what i thougth is
jumper on position 5 was instead on 6.
b) the board was not loking up. it takes a while to access data on the
SD card and while in that more the console/network terminals are not
responsive. i let it run and finished in about 10mins.
TS acknowledged the SD card driver is the culprit, they're working to
improve that.
--
miahi
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [ts-7000] Re: rtai ts9 patches, sjanisch |
|---|---|
| Next by Date: | Re: [ts-7000] PLD registers, still not getting access to memory regs, Curtis Monroe |
| Previous by Thread: | [ts-7000] PLD registers, still not getting access to memory regs, mattsaintdev |
| Next by Thread: | [ts-7000] Re: ts-7300 problems, waggywagz |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU