Hi Matt/Eddie,
I simply commented out the contents of the static int XXXX_blank(int
blank_mode, struct fb_info_gen *info) function and made it simply
return 0.
I'm going to have a go at the flashing cursor as it sometimes appears
on some screens...
PJE
--- In "Eddie Dawydiuk" <> wrote:
>
> Hello,
>
> > Thanks, yea disabled it - can u offer any ts7200 help regarding
> > switching video pages and stopping the monitor blanking ?
>
> I'm not sure if there is a way to tell Linux not to use VESA suspend
> and powerdown modes. You might want to look into this first...
> Otherwise you can modify the driver to ignore Linux when it tells
the
> framebuffer to suspend and powerdown.
>
> e.g.
>
> /*
> * Blank the screen if blank_mode != 0, else unblank. If blank ==
NULL
> * then the caller blanks by setting the CLUT (Color Look Up
Table) to all
> * black. Return 0 if blanking succeeded, != 0 if un-/blanking
failed due
> * to e.g. a video mode which doesn't support it. Implements VESA
suspend
> * and powerdown modes on hardware that supports disabling hsync/
vsync:
> * blank_mode == 2: suspend vsync
> * blank_mode == 3: suspend hsync
> * blank_mode == 4: powerdown
> */
> static int ts7kv_blank(int blank_mode, struct fb_info_gen *info)
>
>
> Above is a snip from ts7kvfb.c.
>
> //Eddie
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|