Hi all,
When you boot TS-Linux and do a "dmesg", you'll notice that the
Compact flash gets loaded as:
/dev/ide/host0/bus0/target0/lun0: p1
To mount it, I used:
$ mount -t ext2 /dev/ide/host0/bus0/target0/lun0/part1 /mnt
This is the card I got with the KIT-7200 (TS-ARM development kit for
TS-7200) and the /boot directory is empty, so I cannot boot from it
just yet. But I was able to mount it.
-Eduardo
--- In "Yan Seiner" <> wrote:
>
> --- In "Eduardo Mendiola" <mendiolae@>
wrote:
> >
> > Hi Mike,
> >
> > I'm also kind of new to the group and Embedded Linux. I'm trying
to
> > get the TS-7200 to boot from the CF.
> >
> > I purchased the TS-ARM Linux development kit for the TS-7200 and
I'm
> > trying to load the file system from the Compact Flash card with
the
> > following commands on RedBoot:
> >
> > RedBoot> fis list
> > Name FLASH addr Mem addr Length Entry point
> > (reserved) 0x60000000 0x60000000 0x00620000 0x00000000
> > RedBoot 0x60620000 0x60620000 0x00040000 0x00000000
> > vmlinux 0x60660000 0x00218000 0x000C0000 0x00218000
> > RedBoot config 0x607C0000 0x607C0000 0x00001000 0x00000000
> > FIS directory 0x607E0000 0x607E0000 0x00020000 0x00000000
> > RedBoot> fis load vmlinux
> > RedBoot> exec -c "console=ttyAM0,115200 ip=dhcp root=/dev/hda1"
> > Using base address 0x00218000 and length 0x000b388c
> >
> > However, the system seems to hang there.
> >
>
> Unfortunately this is not clearly documented in the TS docs. You
need
> to read the redboot docs. (And I really ought to add this to the
> wiki....)
>
> RedBoot> load -r -b 0x00218000 -m disk hda1:/boot/vmlinuz
> Raw file loaded 0x00218000-0x00394043, assumed entry at 0x00218000
> RedBoot> exec -c "root=/dev/hda1 console=ttyAM1,115200"
>
> --Yan
>
------------------------ Yahoo! Groups Sponsor --------------------~-->
Check out the new improvements in Yahoo! Groups email.
http://us.click.yahoo.com/6pRQfA/fOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|