[ts-7000] PC/104 example driver

To:
Subject:	[ts-7000] PC/104 example driver
From:	"hperb2005" <>
Date:	Wed, 12 Jul 2006 20:46:32 -0000

I have a PC/104 Lonworks card and the driver is working well on x86
plateform. I know the configuration is by default 0x340 and interrupt
5. I have try to modify the address to 0x11a0_0340 as the
documentation on the TS-7200 said without result!

Help me!







------------------------ Yahoo! Groups Sponsor --------------------~--> 
Yahoo! Groups gets a make over. See the new email design.
http://us.click.yahoo.com/XISQkA/lOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] PC/104 example driver, hperb2005 <=

Previous by Date:	[ts-7000] DHCP on TS7200, badbeaky
Next by Date:	[ts-7000] Reading GPIO ports, Matt Godbolt
Previous by Thread:	[ts-7000] DHCP on TS7200, badbeaky
Next by Thread:	[ts-7000] Reading GPIO ports, Matt Godbolt
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU