[ts-7000] Ethernet problem on TS-7200

["Janne Mäntyharju" <>]

Hi!

Ethernet port on my TS-7200 board suddenly stopped working. When I apply
power to board, lights at the ethernet port don't show up and attempt to
load kernel from http-server causes "Unable to reach host" error. When
booting up from flash, following rows show up in kernel messages:
ep93xx_eth() version: ep93xx_eth.c: V1.0 09/04/2003 Cirrus Logic
Bringing up interface eth0..
enable_irq(39) unbalanced from c02c10b8
route: SIOC[ADD|DEL]RT: Network is unreachable

This problem mostly renders the board unusable, since inittab in flash
disables console in serial ports, because ports are used by software in
flash.

Is there anything than can be done to fix the board?

--Janne Mäntyharju




------------------------ Yahoo! Groups Sponsor --------------------~-->
Protect your PC from spy ware with award winning anti spy technology. It's free.
http://us.click.yahoo.com/97bhrC/LGxNAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->


Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/