--- In "Andrew Gaylard" <> wrote:
>
> Yeah, I'm using the spca5xx-20060501.tar.gz release.
> The error you reported is simply in a "printk" line --
> commenting it out will allow the module to compile.
>
> However, when running the module together with
> ppp traffic will always crash the kernel with a dump
> something like this:
>
Andrew:
You're not using a 2.0 hub to connect to the camera, by any chance?
I've been fighting this for a few days now on another platform, and it
turns out to be a limitation in the echi-hcd driver. It cannot handle
a USB 1.1 device plugged into a USB 2.0 hub.
In my case, the system either hangs or spontaneously reboots (I don't
have console on it yet so I don't know why; long story - parts missing
in shipment, now backordered until end of June - ARGH! Unlike TS.).
Anyway, the only practical cure is not to use the ehci-hcd module and
run USB at 1.1 speeds.
--Yan
------------------------ Yahoo! Groups Sponsor --------------------~-->
Get to your groups with one click. Know instantly when new email arrives
http://us.click.yahoo.com/.7bhrC/MGxNAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|