On Tue, 16 May 2006, Robert Magyar wrote:
> All of the documentation shows DIO_8 at 0x8084 0030 bit 0 (FGPIO_0 in
> the schematic). I was not able to read it as an input. After trying
> a few things it I found that the DIO_8 pin is located at bit 1 of the
> register.
Yes it was wrongly documented. Caused me no end of trouble when writing
my adio program
http://www.comp.leeds.ac.uk/jj/linux/adio.tgz
But the current ts-7200 user manual from their webpage has it corrected,
well at least it is in my copy dated sept 2005, version 1.4
I've just checked and notice that there's a version 2 there now - better
download and see what's changed.
Jim
------------------------ Yahoo! Groups Sponsor --------------------~-->
You can search right from your browser? It's easy and it's free. See how.
http://us.click.yahoo.com/_7bhrC/NGxNAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|