|
okay i have maid some progress now i have now got ftp working i now also have a piece code that when a push button is connected accross to pin DIO pin 1 and to ground will blink the red and green leds on the ts-7200 when the button is pressed sonow i need to get this piece of c code complied and tranfered to the arm, i think i need to get a set of compiler tools onto the board or onto my host p.c i have two hosts a windows based xp and a linux box running suse 10. What would be the best way to go about this. thanks francis
Garrett Stritch <> wrote: You can subscribe to Unix daily tips here:
From: [ On Behalf Of francis
joss
Sent: Thursday, April 27, 2006 3:53 AM
To:
Subject: Re: [ts-7000] help required thanks
"Don W. Carr" <> wrote: Go look at the example code for the LCD display and keypad, and also read the manuals. You will see how to set each pin as either input or output. If you have specific questions after looking at that
code and after reading the manual let us know. On 4/26/06, francis joss <> wrote: Okay i have made some progress with this i now have the ethernet working and can now telnet into the board and access the web browser, my lecteur has gave me a task to complete
he wants a L.E.D to blink on and off, simple i know he wants me to connet an led to the Di/o terminals and write a piece of code that when run will cause it to bloink at different rates, any ideas To transfer files to the 7200 you should use FTP, but you need to get
the ethernet connection going first. You really only need to set the
IP on your
computer to a fixed IP using the same address range as the
7200 default, such as 192.168.0.5. The default IP of the 7200 should
be 192.168.0.50.
Actually, from the command prompt, type "ifconfig" to verify the
default IP of your 7200 is in fact 192.168.0.50.
Once you have the ethernet connection working, you can also telnet to
the 7200. Of course in a browser window, type in http://192.168.0.50
and you should see the default TS web page.
Well, you need to look for someone locally that has experience with
Linux or Unix in general. We can't help you with everything via the
email list.
Also, if you describe you application, you will get a lot more
helpfull suggestions.
Don.
On 4/21/06, francis joss < m("yahoo.co.uk","francisjoss1981");" target=_blank>> wrote:
> hi
>
> i dont really know how to transfer files to the sbc
>
> so far i have
>
> powered up the board using hyperterminal and got to the stage where i am
> asked for a login to the ts 7200 i log in as root and the busybox built in
> shell loads, i am havng trouble connecting the board by ethernet and i was
> also wondering, how i get the webserver up and running i know apache has
> started once the board has reached this stage.
>
> my problem is that i dont know the basic steps to follow next as i am very
> knew to this product and the language etc any help would be amazing
>
> all i want to do at this stage is get the board up and running with
> everything installedbready to run an application
>
> "Don W. Carr" <m("gmail.com","doncarr");"
target=_blank> > wrote:
> We would like to help, but need more information about the application.
>
> You will as a minimum need to set up a ramdisk to hold the real-time
> data, but should probably consider battery backed RAM to hold the
> real-time data so that you won't lose data in the event of a power
> failure. TS is working on making their battery backed RAM appear as a
> mounted disk drive.
>
> Remember, do NOT write continuously to flash, it has limited write
> cycles. Though, TS uses a special file system for flash to distribute
> the writes, with a 1 GB flash, you would probably last years writing
> 100 bytes per second and that might be cheaper and easier than buying
> battery backed RAM. I am actually considering this because the the
> battery backed RAM boards are very
bulking and cost over $100 for 2
> meg. I would take 3 years to fill a 1 GB flash writing 100 bytes per
> second.
>
> To get started, I would reccomend generating straight html for your
> real-time displays. If you add the following to the top of your file,
> this will force a refresh every second.
>
> <META HTTP-EQUIV="refresh" CONTENT="1">
> <meta http-equiv="pragma" content="no-cache">
>
> Also, you should use Firefox since it works so much better for
> real-time displays. Internet Explorer insists on scrolling to the top
> of the page on refresh, rather than leaving you where you were, and
> also gives a lot of blink. With Firefox, you don't get all the blink.
>
> You can also use overlapping images to create interesting animations,
> though you can not rotate. You can even use
transparency with png
> images. Here is an example:
>
> <div style="position:absolute; top:50px; left:0px;">
> <img SRC=""
> </div>
>
> <div style="position:absolute; top:95px; left:26px; z-index:2">
> <img SRC="">> </div>
>
>
> Well, give us some more information and we can help you.
>
> Do you know how to use the C compiler and transfer files to the SBC?
> Do you understand the basics of Apache? Apache is turned on by
> default.
>
> Don.
>
> On 4/21/06, francisjoss1981 <> wrote:
> > i am currently under
taking a project for university using a TS 7200
> > to set up a data aquisition system usin a web browser but i havent got
> > a clue wee to start
> >
> > so far i have connects the board to my laptop using the serial port on
> > the board and used hyperterminal to boot into it
> >
> > this has been successful and i am able to log in as root but from here
> > i have not a clue were to go there is no file system or anything on
> > the board any help as to how to take the next step would be great
> >
> > thanks
> >
> > francis
> >
> >
> >
> >
> >
> >
> >
> >
> >
________________________________
> > YAHOO! GROUPS LINKS
> >
> >
> > Visit your group "ts-7000" on the web.
> >
> > To unsubscribe from this group, send an email to:
> >
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
> >
> > ________________________________
> >
>
>
> --
> Dr. Don W. Carr
> J. G. Montenegro 2258
> Guadalajara, Mexico
>
+52-333-630-0704
> +52-333-836-4500 ext 2930
>
>
>
> ________________________________
> 24 FIFA World Cup tickets to be won with Yahoo! Mail. Learn more
>
>
> ________________________________
> YAHOO! GROUPS LINKS
>
>
> Visit your group "ts-7000" on the web.
>
> To unsubscribe from this group, send an email to:
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
> ________________________________
>
>
>
>
--
Dr. Don W. Carr
J. G. Montenegro 2258
Guadalajara, Mexico
+52-333-630-0704
+52-333-836-4500 ext
2930
- Visit your group "ts-7000" on the web.
- To unsubscribe from this group, send an email
to:
=Unsubscribe
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
--
Dr. Don W. Carr
J. G. Montenegro 2258
Guadalajara, Mexico
+52-333-630-0704
+52-333-836-4500 ext 2930
24 FIFA World Cup tickets to be won with Yahoo! Mail. Learn more
24 FIFA World Cup tickets to be won with Yahoo! Mail. Learn more
24 FIFA World Cup tickets to be won with Yahoo! Mail. Learn more
Switch an email account to Yahoo! Mail, you could win FIFA World Cup tickets.
SPONSORED LINKS
YAHOO! GROUPS LINKS
- Visit your group "ts-7000" on the web.
- To unsubscribe from this group, send an email to:
=Unsubscribe
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
|