Hi !
I am facing problem when I am trying to mount the USB
on TS-7250 board.
When I load USB Modules using loadUSB & loadUSBModules
scripts, it gives following errors:
mount: Mounting
/dev/scsi/host0/bus0/target0/lun0/part1 on /mnt/cf
failed: No such file or directory
mount: Mounting devfs on /mnt/cf/dev failed: No such
file or directory
umount: /mnt/cf/proc: No such file or directory
chroot: cannot execute /etc/init.d/rcS.USB: No such
file or directory
umount: /mnt/cf: Invalid argument
$ hub.c: new USB device not_pci-3, assigned address 2
usb.c: USB device not accepting new address=2
(error=-110)
hub.c: new USB device not_pci-3, assigned address 3
usb.c: USB device not accepting new address=3
(error=-110)
Now, I have tried by changing kenrel source & using
NFS mount to solve the problem. But ,it didn't work.
Another thing that I can assume that it is because of
IRQ assinging problem.
when i see IRQ on dev.board by /proc/interrupts, it
shows following:
4: 10441 timer
39: 8977 EP9312_Eth
52: 440 amba
54: 12 amba
56: 0 usb-ohci
Err: 0
Any one who is using TS-7250 board , can please see
the IRQ on their board & tell me whether the problem
of USB is because of IRQs? or anything else?
Please help me out.
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|