ts-7000
[Top] [All Lists]

Re: [ts-7000] I need Memory Map for RTC TS-5620

To:
Subject: Re: [ts-7000] I need Memory Map for RTC TS-5620
From: Curtis Monroe <>
Date: Tue, 18 Apr 2006 13:00:00 -0400
>From the 7250 manual:

The TS-7250 optionally supports a Non-volatile Battery-backed real-time clock
(RTC)
which is soldered onto the board. This option uses an ST Micro M48T86PC1
module for
the real-time clock function. This module contains the lithium battery, 32.768
kHz crystal,
and a RTC chip with 114 bytes of battery-backed CMOS RAM. It will maintain
clock
operation for a minimum of 10 years in the absence of power.
The 114 bytes of non-volatile RAM, physically located in the RTC chip, are
available to the
user. Contact Technologic Systems for driver support.
The RTC is accessed using two registers. The write-only index register is
located at
physical address location 0x1080_0000 and the RTC data register is location at
physical
address location 0x1170_0000. These are byte-wide registers with the Index
Register
property of write only. The Data Register has a read/write property. Valid
Index Register
values are between 0 and 127, decimal. The first 14 index locations are used
for
accessing the RTC Time and Date registers. The next 114 locations are
non-volatile RAM
locations.
This option is NOT compatible with the TS-5620, a peripheral board that also
uses an ST
Micro RTC module for real-time clock functionality. While the two options are
mutually
exclusive, it is possible to use the TS-5620 peripheral board on a TS-7250
that does not
have the on-board RTC option installed. Any source code that utilizes the RTC
is
compatible with both optional installations.


also see the schematics, and data sheet for the RTC.

-Curtis.




On April 18, 2006 11:36 am, parayam2006 wrote:
> I Use real Time Clock TS-5620 in TS-7200. I need Memory Address of Non
> Volatile RAM.
>
> Urgent... please
>
> /*******/
> Only for Spanish People..
> Para los Hipanos.
> Necesito usar la memoria no volatil del Reloj de Tiempo Real del TS-
> 5600, lo instalé en un 7200 y solo tengo la dirección para un pc
> standard (070 y 071), la necsito para el 7200 arm
>
> Gracias
>
>
>
>
>
>
>
>
> 
> Yahoo! Groups Links
>
>
>
> 
>
>
>
>



Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU