[ts-7000] pc104 data bus

ts-7000

[ts-7000] pc104 data bus

To:
Subject:	[ts-7000] pc104 data bus
From:	"caligula455" <>
Date:	Tue, 28 Mar 2006 01:25:29 -0000

I am trying to build a simple DAC board to use with my TS7200 so i can
have some analog outputs for a robot.  Is there a way to write
directly to pins A2-A9 (Data7 -Data0) on the pc104 header?  If so
whatis the memory address?  The documentation lists different address
spaces for this.  I want to set this data bus then use a DIO pin to
pulse my DAC chip and set the voltage.  Thanks.

Kevin








 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] pc104 data bus, caligula455 <=

Previous by Date:	Re: [ts-7000] Re: Building Kernel Module, Andy Gryc
Next by Date:	[ts-7000] Re: YAFFS - Recovering from a full onboard flash, Steve Hier
Previous by Thread:	[ts-7000] Scratchbox as development environment, Markus Peuhkuri
Next by Thread:	[ts-7000] Re: New Product: TS-7300, BxWen
Indexes:	[Date] [Thread] [Top] [All Lists]

Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU