The SerialBlaster might just work with the TS-7260. I haven't tried it, as I
don't have a TS-7260. But I think the TS-7260 is backwards compatible with
the TS-7250. I can't find schematics for the TS-7260, so I don't know if they
changed anything.
The TS-7260 has a MAX II CPLD that has 1KB built-in EEPROM. If TS is using
this built-in EEPROM to boot the system the SerialBlaster cannot restore it.
Its good to hear someone is using the SerialBlaster. Maybe I should make some
updates!
Anyone else using it?
-Curtis.
On March 16, 2006 08:58 pm, genosensor wrote:
> What, if anything, would be necessary to modify your very cool
> blaster utility for use with the TS-7260? Might it "just work"
> as is? I know I could compare the eeprom contents of the
> 7260 with that of the 7250 for a start.
>
> I'm going to brick one of them eventually...
>
> - brent
>
> --- In Curtis Monroe <> wrote:
> >
> > type "help" at the redboot prompt and you will see two new commands
> listed:
> >
> >
> > RedBoot> help
> > .
> > .
> > .
> > Read eeprom content
> > eeprom_read -b <location> -o <eeprom offset> -l <length> [-d dump]
> > Write eeprom content
> > eeprom_write [-b <location>] -o <eeprom offset> [-l <length>]
>
>
> > .
> > .
> > .
> >
> > To copy the content of the EEPROM to memory (location 0x00007000)
> you type:
> >
> > RedBoot> eeprom_read -b 0x00007000 -o 0 -l 2048
> > Read 2048 bytes of eeprom content
>
> ... snip ...
>
> >
> > Thats the TS-PREBOOT code. You can save it, download it to your
> development
> > machine and disassemble it, or look at the commented disassembled
> version
> > included in the Serial_Blaster package.
> >
> > -Curtis.
> >
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|