[ts-7000] TS-K7V and console

To:
Subject:	[ts-7000] TS-K7V and console
From:	"Yan Seiner" <>
Date:	Thu, 16 Mar 2006 23:55:37 -0000

I've got a bit of a problem with the console...

My goal is to have console (including logging and all messages) go to
/dev/ttyAM1.  I have the jumper set.

But when I fire up the VGA daughterboard, console attaches to the
graphics screen.  This is not good, since I run a browser in that
window....

The only way I can get it back is to cause a kernel oops, after which
the console will be on /dev/ttyAM1....  Not quite what I am hoping for
in a production machine....

How do I pin console to /dev/ttyAM1?

Thanks,

--Yan





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] TS-K7V and console, Yan Seiner <=

Previous by Date:	[ts-7000] gpio kernel drivers...., Yan Seiner
Next by Date:	Re: [ts-7000] gpio kernel drivers...., Rich Wilson
Previous by Thread:	[ts-7000] gpio kernel drivers...., Yan Seiner
Next by Thread:	[ts-7000] Low Power modes for the TS-7260, genosensor
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU